Product ID:BRITEMOR 446
MSDS Date:02/01/1994
FSC:6850
NIIN:01-267-4345
MSDS Number: BVBMR

CHEM-TREND INC

1445 W. MCPERSON PARK DR
HOWELL, MI 48844-0860
US

Emergency Phone: 517-546-4520

Info Phone: 517-546-4520

Preparer: JLG

Cage: 2W738

DUNN R G ASSOCIATES INC

HUMBLE, TX 77396-2078 US

Telephone: 281-441-7772

Cage: 0A272

HYDROCARBON NAPHTHA

CAS: 64742-47-8

Fraction By Weight: 30-40%

DIETHYLENE GLYCOL MONOBUTYL ETHER

CAS: 112-34-5

RTECS: KJ9100000

Fraction By Weight: 5-15%

PHOSPHATE ESTER BLEND

Fraction By Weight: 10-20%

INGRED NONHAZ BASED ON SUPPLIERS

Fraction By Weight: 35-45%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONG/REPEAT SKIN CONTACT MAY DEFAT
SKIN WHICH MAY CAUSE IRRIT OR DERM. LIQ PRODUCT SPLASHED IN EYES
WILL PROBABLY IRRIT. INHAL OF HI VAP CONCEN MAY CAUSE NASAL & RESP
IRRIT & EVEN ASPHYXIATION AT E XTREME LEVELS. INGEST MAY CAUSE
IRRIT OFGI TRACT. DANGER OF ASPIRATION EXIST WHICH CAN BE FATAL DUE
TO CHEM PNEUMONITIS
Explanation of Carcinogenicity:PER MSDS:LISTED CARCINOGENS (NTP,IARC OR
OSHA):NONE.
Effects of Overexposure:SKIN:IRRIT, DERM. EYE:IRRIT. INHAL:NASAL & RESP
IRRIT, DIZZ, WEAKNESS, FATIGUE, NAUSEA, HEADAHCES, ASPHYXIATION.
INGEST:GI TRACT IRRT, NAUSEA, VOMITING, DIARRHEA, ASPIRATION.
CHRONIC EFFECTS:EXCESSIVE EXPOSURE TO DIETHYLENE GLYCOL
MONOBUTYLETHER MAY CAUSE LIVER, KIDNEY, & BLOOD EFFECTS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MFG.

First Aid:SKIN:WASH W/SOAP & WATER. EYE:FLUSH W/WATER FOR @ LEAST
15MINS. CONTACT PHYSICIAN. INHAL:IF ADVERSE EFFECTS SUCH AS DIZZ,
NAU, IRRIT ARE NOTED, MOVE TO FRESH AIR. CONTACT PHYSICIAN.
INGEST:DO NOT INDU CE VOMTI. CONTACT PHSYCIAN IMMED.

Flash Point Method:PMCC
Flash Point:>220F,>104C
Lower Limits:SEE SUPPLEM
Upper Limits:SEE SUPPLEM
Extinguishing Media:USE FOAM, CARBON DIOXIDE, OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS WHEN
FIRE FIGHTING IN A CONFINED SPACE.
Unusual Fire/Explosion Hazard:CONTAINERS EXPOSURED TO INTENSE HEAT
SHOULD BE COOLED W/WATER TO PREVENT PRESSURE BUILD-UP WHICH COULD
RESULT IN CONTAINER RUPTURE.

Spill Release Procedures:SM SPILLS:SOAK UP W/ABSORBENT MATERIAL. LG
SPILLS:ELIMINATE ALL SOURCES OF IGNITION. VAPORS ARE HEAVIER THAN
AIR & MAY SPREAD LONG DISTANCES OR COLLECT IN LOW SPOTS. DIKE TO
PREVENT RUNOFF, RECOVER LI UQID, SOAK UP REMAINING LIQ
W/ABSORBENTMATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MFG.

Handling and Storage Precautions:DO NOT CUT/PUNCTURE/WELD ON EMPTY DURM
CAUSE MAY CONTAIN EXPLOSIVE OR HARMFUL VAPS.STORE AWAY FROM STRONG
OXIDIZERS.KEEP CNTNRS CLOSED WHEN NOT IN USE
Other Precautions:GROUND ALL EQMPT PUMPING MATL.PROTECT FROM STATIC
ELECT SPARKS/IGN SOURCES.DON'T STORE @ TEMPS >110F TO AVOID VAP
PRESSURE IN CLSD CNTNRS.WHEN NORMAL NONDESTRUCTIVE TEST APPLICATION
PRACTICES ARE USED @ AMB TEMP DON'T (CONTD IN SUPPLEMEN)

Respiratory Protection:GOOD INDUSTRIAL HYGIENE PRACT RECOMMEND
ENGINEERING CNTRLS BE USED TO REDUCE ENVIRO CONCEN TO
PEL.MSHA/NIOSH APPROVED RESP(AIR SUPP/AIR PURIFY)MAY BE USED WHEN
ENGINEERING & WORK PRACT CNTRLS ARE NOT TECHN FEASIBLE/BEING
INSTALL/FAIL/SUPPLE
Ventilation:LOCAL &/OR MECHANICAL VENTIALTION BE USED TO REDUCE
ENVIRONMENTAL CONCEN TO PERMISSIBLE EXPOSURE LEVEL.
Protective Gloves:NEOPRENE,POLYVINYL ALCOHOL,NBR NITRILE.
Eye Protection:SAFETY GLASSES W/SIDE SHIELD,CHEM GOGGLE
Other Protective Equipment:APPROPIRATE CLOTHING TO AVOID SKIN CONTACT.
Work Hygienic Practices:USE GOOD INDUSTRIAL HYGIENE PRACTICES. LAUNDER
CONTAMINATED CLOTHING PRIOR TO REUSE.
Supplemental Safety and Health
FLAMM LIMITS IN AIR:HYDROCARBON NAPHTHA LEL=0.6,UEL=7;DIETHYLENE GLYCOL
MONOBUTYL ETHER LEL=0.9,UEL=24.6. CONT'D-ANTICIPATE EXCESSIVE
EXPOSURE LIMITS TO BE EXCEEDED.

HCC:V2
Boiling Pt:=237.2C, 459.F
Vapor Pres:2.10
Vapor Density:>1
Spec Gravity:0.92
Evaporation Rate & Reference:<1, NBUAC=1
Solubility in Water:EMULSIFIES.
Appearance and Odor:BRIGHT YELLOW LIQUID W/GREEN CAST; MILD OILY ODOR.

Stability Indicator/Materials to Avoid:YES
STORE AWAY FROM STRONG OXIDIZERS.
Stability Condition to Avoid:NONE KNOWN HOWEVER W/AEROSOL CANS AVOID
HIGH TEMPERATURES.
Hazardous Decomposition Products:HYDROCARBON DECOMPOSITION PRODUCTS AT
ELEVATED TEMPERATURES.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. THIS PRODUCT DOES NOT FALL UNDER CURRENT EPA
RCRA DEFINITIONS OF HAZARDOUS WASTE. THIS PRODUCT DOES NOT CONTAIN
ANY CERCLA REGULATED MATERIALS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.